Discovery Electronics engineers also designed the new 10 inch searchcoil to give excellent stability in high mineral ground without giving up depth.
Even though the Millennium Baron II is a high-end top performer, it is still easy-to-use and setup. Operating the Millennium is as simple as turning it on and moving the mode switch to the right position. The detector is now ready to use.
The Millennium II has many new features that make it easier to use, as well as several new performance features. With the original Millennium every time you turn it on you had to reset all the controls. Not anymore! You will never have to remember where all the controls were set since the new chip remembers every setting for you. And, if you have special control setups for different applications those can be stored permanently in memory and recalled at anytime.
There are many more features too. Below is a listing of the new features that are covered throughout the manual. Each item is explained fully in hunting Tips and Engineering Details included with each detector.
Features:
S-style rod
hip mountable case
12.5 khz operating frequency
3.7 lb less batteries,
57 inches fully extended, 46 inches collapsed
Controls include:
Power/off and on
Threshold ground offset switch
Mode toggle master switch for all-metal, motion discrimination
Enter/menu switch
10 segment LED target ID meter
1/4 inch headphone jack
Interchangeable 10 inch thunderhead waterproof searchcoil
.
Operates on (8) AA batteries
Limited 2 year warranty.
Advanced features of the Millennium Baron Coin-Trax II:
Non-volatile memory that will remember your settings when you turn the detector off.
Special Sale Price $828.00
User presets that allow the operator to program four different customs operation setups.
Deep search mode (DS) for improved detection depth.
Activation LED mode in this mode two LED's will light when marginal targets are detected.
Audio Indication feature that produces a staccato audio sound when you pass over an iffy target.
Two Standard discrimination modes.
Reject LED function for indicating any target that falls below the set discrimination level.
Audio reject indication that works in combination with the reject LED.
Battery Check by-pass.
Factory Reset to restore the Millennium back to Factory Settings.
Smart Scan Technology or SST can now be activated or deactivated.